If you want to build something using a Raspberry Pi, you'll probably use resistors. Like the previous Resistor Color Duo and Resistor Color Trio exercises, you will be translating resistor color bands to human-readable labels.

Each resistor has a resistance value.
Resistors are small - so small in fact that if you printed the resistance value on them, it would be hard to read. To get around this problem, manufacturers print color-coded bands onto the resistors to denote their resistance values.
Each band acts as a digit of a number. For example, if they printed a brown band (value 1) followed by a green band (value 5), it would translate to the number 15.

Instructions

In this exercise, you are going to create a helpful program so that you don't have to remember the values of the bands. The program will take 1, 4, or 5 colors as input and output the correct value in ohms. The color bands are encoded as follows:

black: 0
brown: 1
red: 2
orange: 3
yellow: 4
green: 5
blue: 6
violet: 7
grey: 8
white: 9

In Resistor Color Trio you decoded the first three color bands. For instance: orange-orange-brown translated to the main value 330. In this exercise you will need to add tolerance to the mix. Tolerance is the maximum amount that a value can be above or below the main value. For example, if the last band is green, the maximum tolerance will be ±0.5%.

The tolerance band will have one of these values:

grey - 0.05%
violet - 0.1%
blue - 0.25%
green - 0.5%
brown - 1%
red - 2%
gold - 5%
silver - 10%

The four-band resistor is built up like this:

Band_1	Band_2	Band_3	band_4
Value_1	Value_2	Multiplier	Tolerance

Examples:

orange-orange-brown-green would be 330 ohms with a ±0.5% tolerance.
orange-orange-red-grey would be 3300 ohms with ±0.05% tolerance.

The difference between a four and five-band resistor is that the five-band resistor has an extra band to indicate a more precise value.

Band_1	Band_2	Band_3	Band_4	band_5
Value_1	Value_2	Value_3	Multiplier	Tolerance

Examples:

orange-orange-orange-black-green would be 333 ohms with a ±0.5% tolerance.
orange-red-orange-blue-violet would be 323M ohms with a ±0.10 tolerance.

There are also one band resistors. One band resistors only have the color black with a value of 0.

Your program should translate an input list of resistor band colors into a label:

"... ohms ...%"

So an input list of ["orange", "orange", "black", "green"] should return:

"33 ohms ±0.5%"

When there are more than a thousand ohms, we say "kiloohms". That's similar to saying "kilometer" for 1000 meters, and "kilograms" for 1000 grams.

So an input list of ["orange", "orange", "orange", "grey"] should return:

"33 kiloohms ±0.05%"

When there are more than a million ohms, we say "megaohms".

So an input list of ["orange", "orange", "blue", "red"] should return:

"33 megaohms ±2%"

Source

Created by

@meatball133
@bethanyg

Based on

Based on earlier resistor color exercises made by Erik Schierboom and Maud de Vries - https://github.com/exercism/problem-specifications/issues/1464